R/C Tech Forums - View Single Post - Xray T1
Thread: Xray T1
View Single Post
Old 09-09-2002, 07:18 AM
  #1650  
dtm
Tech Champion
 
dtm's Avatar
 
Join Date: Aug 2001
Location: HKG
Posts: 7,551
Default

Originally posted by stormperson
........... is there a "not aviable to the public" top deck for carpet racing? since i have the flexi one (which was included in the evo 2 that i bought), but the chassis flexes so much i find it hard to believe that the regular strenth one will do the trick.

also i have been running a tc3 for a few years, i know how to free up that drive train, but what do i do for an xray ray? i normally take off the inside shield of the beairngs, spray it out, and put a very lightly beairng on it. but what do i do for the belt? i have heard some people soak it in wd-40?
You can buy the old upper deck without the slot cut out...this will make the car stiffer. You can notice the difference just by twisting the chassis a little.

You have the "thinner" Racing belts with the Evo 2.....not a good idea to use WD40...will leave you with a belt which is smoother...but will stretch very quickly.....those racing belts don't come cheap!!
dtm is offline