Originally Posted by markp27
Do you mean to start the engine on the starter box? This has nothing to do with the clutch settings.
If you mean when the engine is running and you try and get the car to move, if the engine revs very high, then you have tightened the clutch spring pre-tension nut too much.
Send us some details of how far onto the pre-tension nut is screwed down - measure from the top of the screw thread to where the pre-tension nut is.
Cheers, Mark.
Not really with the starter box, what I mean is when I accelerate. The pre-tension nut is 1mm in from the screw thread.
Thanks