Originally Posted by Artificial-I
1. The exhaust port sits very close to the side belt.
On my Yokomo GT4W2L the exhaust port its ALMOST rubbing against the belt, but it was just a thing of moving on angle the header to clear the problem ... and its working great for the last 2 years heheheheh ...
Originally Posted by Artificial-I
2. When installing the motor and tightening the engine down. I noticed one bolt was having trouble staying still. It might have been the screw.
Always be sure to use good screws on your engine ...
Originally Posted by Artificial-I
3. Then I finally noticed the flywheel is exposed underneath by like 1-2mm. I have installed two other motors on the car and none had this problem.
This its easy, just shim your engine mounts in order to clear that space ...
hope this helps ...