R/C Tech Forums - View Single Post - Team Much-More cell master v1
View Single Post
Old 06-15-2005, 02:05 AM
  #499  
Ryan Lee
Tech Regular
 
Ryan Lee's Avatar
 
Join Date: Nov 2004
Location: Seoul, Korea
Posts: 254
Default 3600 cell

Originally Posted by Andrew j
Just wondering if any one can tell me why my 3600s only charge up to around
2900mah. they have only been used 8-10 times each and are always discharged to 5.4 arfter every run. ive tried peek charging and step charging as per manual.they seem to always cut out around 2900mah-9.3volts.
Regards:Andrew.
After charge, check the temperature of cell.
If they are not enough warm, charge them again with Peak charge mode.
After charge, temperature should be around 42~50degree.

Higher deltapeak value also will help.
Please try 10mV ~ 16mV.

And make sure keeping good contact between alligator clips and your battery.
This s very important.

Thank you,
Ryan Lee is offline