Originally Posted by
ChvyPwr-BB
On the list of parts needed for 2.0 "conversion" it has sway bar mount set listed, whats the difference between 1.0 and 2.0 if using 1.0 arms currently? Also when putting the 2.0 diff housing on the 1.0 chassis, do you just leave out the bottom screws that go through the bottom holes and into the front housing cover? Those holes are like, just slightly off and the button heads wont clear the open hole.
you’ll need to use the standard front shock tower when using the straight A-Arms. The arm are the same layout and length, the Gullwing mount the shocks 2mm lower.
The sway bar mounts into the same location on the arm, it protrudes further on the new bulkhead.
Try a different screw style with a smaller head, might work or mount the front cap and the bottom screws before mounting the diff housing to the chassis. Inconvenient but it should work. You could also dermal the chassis if needed.