Originally Posted by
jcalchi
impalabob,
Since you just did your build, did you have any issues with your diffs leaking?
I noticed diff fluid accumulating on both front and back belts, so I ordered some new O-rings and rebuilt the diffs and that seems to have fixed it.
Looking at the design, it’s easy to not get the O-rings in the right position, and easy to mix them up. Good thing Kyosho still supports parts for this car.
Another question: how much axial play does your clutch bell have? The spec shows that there should be some. Design-wise, any thoughts on why Kyosho wants axial play on the bell? I’d think there shouldn’t be any at all, and that the play would delay engagement of the clutch.
Thanks,
jcalchi
For my diff build i used black rtv before putting the diff together no leaks, i used a nice smooth layer of rtv ,and as for as my clutch bell end play very minimal play the engine im running is the Emx Wc picco 12 the gearing im running is16/60 21/55 tire size 58/60 CZ1 body, diffs 1,000,000 front 100,000 rear here in Florida the traction get pretty high, soon I will test a locked front diff will keep ya posted ,hopefully this helps.