Originally Posted by
shortbus
I have a KO PROPO Helios with a Spektrum SM1000 DSM module (says KO PROPO in small print across the module label). I then purchased a Spektrum SR3000 recv'er (Universal). I keep trying to bind the two but keep getting an audible alarm from my ESC which would indicate a connection failure. I am able to go back and everything is fine with my old AM system.
I'm just using a Tamiya RTR M03 chassis.
Anyone have any suggestions or am I going thru the binding process wrong?
1) Turn on Radio with module button pressed (released once I have a solid light)
2) Turn on car with receiver button pressed (just blinks green), also ESC audible alarm continues to beep
Specktrum 3000, 3001 only , Sr300 , SR200 are different bind process
Press and hold bind button on RX and hold turn on RX .
Rease button light will flash
Press and hold bing button on radio module.
turn transmitter on holding bind button
release bind button after light turns green and flashes and wait a few seconds
If done correct both lights turn solid bind complete.