Originally Posted by biz77

Just wanted to come back to this thread to say my M8D charger has been awesome so far. The interface is much easier than the iCharger's. No issues running both channels simultaneously at 30-amp charge or 30-amp regenerative discharge. Only complaints are:
1. Screen resolution/refresh rate isn't that great - This can make precise settings via touchscreen cumbersome - you'll want to use the scroll wheel. Regular tasks, like selecting a charge profile or starting a charge is not issue via touchscreen.
2. Voice prompts are annoying.


I was about to pull the trigger on an iCharger DX6 but ended up going to the M8D due it being half the price. The only feature from the DX6 that I'd like to have on the M8D is the power supply function. It would be great to be able to plug my 24-volt soldering iron into the charger output instead of using a boost converter off the 12-volt supply.
If you look around AliExpress, you can find M8D's for under $80 delivered to your door.



We have a group of five people that will be plugging in multiple chargers to a single 100Ah LiFePO4 battery. I believe between us, we'll have three M8D's, two X6's and maybe a 308 or 406 DUO. I tested the setup at home with my 406DUO and M8D. No issues doing a combined 140 amps charging nor regenerative discharging with all four charger channels fully loaded with 1s batteries (we race 1/12th scale). We have the luxury of our own static pit spots, so we can leave the 12 volt battery on-site, but even if I had to lug it, it's only about 25 LBS. I paid about $160 for it, which is getting down close to the least expensive 2-pack of 4s 10,000mAh LiPo's I saw on Amazon and the big battery is 5x the capacity. The big battery also has the advantage of having a built-in battery management system, so no need to worry about balancing cells. Just for reference, charging the four ~7,500mAh 1s packs from 3.2 volts to full charge consumed 4% of the available capacity of the 100Ah LiFePO4. Simple math says we can charge more than 40 1s batteries from dead to full charge on a single charge of the LiFePO4 battery. We'll keep the big battery topped off with a small Hota 200-watt AC-powered charger that can run simultaneously during any charge or discharge cycles.