R/C Tech Forums - View Single Post - ToolkitRC M8D Charger
Thread: ToolkitRC M8D Charger
View Single Post
Old 09-15-2024 | 06:49 PM
  #43  
disaster999's Avatar
disaster999
Regional Moderator
iTrader: (1)
 
Joined: Aug 2001
Posts: 4,285
From: Hong Kong
Default
Originally Posted by rustyus
Can a person use a resistor bank to discharge a battery on the M8D?

Nothing in the manual about the use of 800W @MAX 30A Recycle mode. I currently have/use a resistor bank, on my Hota units, to discharge a pack quickly if the pack is not going to used shortly. Being able to do the same with the M8D would be a selling point to me.
As stated before, no, you cannot use a resistor bank for this charger. The only way you can discharge at the 800W is if you power the charger with a 4 cell battery or car battery and dump the charge back into that.



Last edited by disaster999; 09-15-2024 at 07:06 PM.
disaster999 is offline  
Reply