Originally Posted by
shortcut3d
I’m having problems with my 10PX and binding. I’m using R1 Wurks ESC and Gen3 Servo. Right now using digital servo as the channel steering because SR and UR so odd things. First, the centering between Digital Servo, SR and UR varies wildly enough it can’t be trimmed out. Second the range of motion is decreased with SR and UR almost like there is an end point adjustment. Third sometimes I need to reverse both ch1 and ch2. Sub-trim and EPA are all at 100 when binding. The only change is the protocol speed.
...but what is your receiver as you did not mention which model it is as that will probably be most important piece of data for giving you guidance.
Last edited by figgie; 06-25-2024 at 07:07 PM.