I really like the PN Motor Pods! Fit and Finish are very good, and the ability to raise or lower the axel height helps adjust the CG to stop traction rolls!
And the PN 70T suits my driving stile. The torque is much higher than the Ready Set motor, along with the drag brake, but you can use a larger pinion and turn down the Throttle D/R to help a lot with those.
The one thing I have learned, the hard way, is to keep an eye on the brushes. If you run a lot they can wear quickly compared to larger r/c I have run. The end plates holding the brushes pop off easily with the motor out of the pod, so checking them isn't too hard. If you have good eyes you can see them through the end bells cooling cut outs. I try with a head lamp and magnified glass, but with my eyes it's a joke!
I really like brushless motors, but with that not being an option on Ready Set boards, the PN70T is the best option I have found for a Brushed motor with threaded holes for mounting to PN Motor Pods.
Have fun switching up your MR03 to find what suits ur driving style, and hope you find a permanent spot of your M96! Drew