Well after A LOT of thinking, adding, and figuring, I decided to build a MR03 EVO with the parts I have and ordered the rest! I also ordered a 3500 and 5500kv rocket brushless motors, so I can move all my EVO's to brushless, as I seem to drive them more consistent. I'm not sure what motor pod I'm going to run. I have a PN V2/3 94/98mm pod, but I'm going to get a Nexx 90/94 pod. I just don't know if I want to go with the RM or MM pod. I really like the RM pod, but have never run the 90MM.
For those who have ran them both which do you prefer?
THANKS for all who have helped!!! Drew
update:
After rereading the Mini-Z and Mini96WC threads for info on the Nexx MM 90/94mm pod, it seems that the MM is limited in the gearing so I went with what I know, the 90/94mmRM. So I will now be able to setup this new chassis from 90mm Narrow to 98mmm. It will have PN Low Down Knuckles, Inner Tube Friction Shock set front end/ or normal, delrin servo gears /w brass 4th, PN king pins w/Kyo floro balls, PN V2/3 94/98mm or Nexx 90/94mmRM motor pod, Rocket 3500Kv, and a PN Gear Diff.

Now the dreaded wait for shipping!!! I have 2 orders coming from Japan, so knock on wood everything goes through customs easily! One pkg has some 750hv AAA's, so we'll see!