R/C Tech Forums - View Single Post - B6.3d converted to carpet
View Single Post
Old 02-21-2024 | 08:27 AM
  #6  
nielsm
Tech Apprentice
 
Joined: Oct 2023
Posts: 66
From: Westchester, NY
Default

Carpet is very different than dirt tracks. Even modern “dirt” tracks for 1/10 in the US are very different than they were back in the 80s. “Feeling loose and difficult to control” probably needs a bit more detail. Generally a car will feel looser on real dirt tracks as it fights for grip. Carpet is such high traction it’s not typical for the car to feel loose, but often the opposite as twitchy. Twitchy can be difficult to control and cause you to over control the car causing traction rolls. The difference of on and off-power steering is very different for carpet than on lower grip surfaces for 2WD. So where are you feeling the difficulty with your car?

Originally Posted by Carpetracer92
I have been participating in RC car racing for a considerable amount of time. Recently, I began racing off-road on carpet tracks, which has proven to be quite difficult. Despite using a tuning sheet for carpet tracks, I am still experiencing issues with my car feeling loose and difficult to control, especially during turns. I am currently using a Fly Sky nb4 controller . Wondering if adding a thicker sway bar will help? Thanks
nielsm is offline