Maybe others, but not ours, we developed these for 1/8th. We designed these with a case height of about 28mm rather than a traditional 26mm case, and we use the same brushless motors as our standard size servos. They are basically a more compact version of our standard servo, hence why they are so powerful, and fast. Our 25kg, and 15kg are even faster. All our customers that use our low profile servos use them for 1/8th Truggy, and Buggy as that is what they were designed for.

Did you even watch our test results?? Our 35kg produces over 35kg at 7.4v, and has a speed of .06 seconds. Our 35kg low profile tested at 38kg which is over 500oz of torque. More than enough for any 1/8th scale application.

We even have a 45kg servo low profile which is also popular for 1/8 Truggy, and these produce well over 45kg, around 650oz of torque. Here are the test results for our 45kg low profile, and these were sent to Gary and Mike over at VRP Pistons, also known as Vision Racing Products. They use our servos in 1/8 Truggy, and Buggy.

45kg Low Profile Torque Test Results
https://www.youtube.com/watch?v=KYxvAEPmxjU