R/C Tech Forums - View Single Post - Specification for the binding protocol?
View Single Post
Old 08-11-2023 | 11:50 PM
  #5  
Roelof's Avatar
Roelof
Tech Lord
 
Joined: Aug 2007
Posts: 14,046
From: Holland
Default

Every brand and even within a brand every protocol has their own protocol. This is to prevent people will buy cheaper receivers but also to prevent binding the wrong receiver or protocol.
So no, you can not bind everything.

To go further in depth beside the binding. Basically there are 2 type of transmission systems DSSS and FHSS.
- DSSS is where the receiver and transmitter chose a free channel to stay on
- FHSS is where the transmitter and reciever hop from frequency to frequency (like cellular phones)
Also this is why you can not bind everything.

A common mistake is that most RC stuff works on FHSS and so any FHSS receiver should work on any FHSS transmitter but that is wrong. It is a way of transmission, it does not say what language is transmitted and every brand has its own language.
Roelof is offline