R/C Tech Forums - View Single Post - RCHourglass DIY Lap Timing (AKA Cano revised)
Thread: RCHourglass DIY Lap Timing (AKA Cano revised)
View Single Post
Old 08-08-2023 | 04:08 AM
  #907  
gusdepaulasd
Tech Initiate
 
Joined: May 2022
Posts: 45
Default
Originally Posted by mdenadal
Just to share my experience with MLA30+.

First tests were made using the MLA30+ powered by its injector (disabling decoder antenna 5V).
All was working well but signal intensity was sub optimal.

Changing original MLA30+ antenna cable (mounting a bnc connector on MLA30+ box and using a 15m RG58 cable) I get rid of the injector powering the MLA30+ directly with decoder 5V as @andreas78 does.

Result: signal improvement is huge! More intensity and cleaner signals.
Furthermore tuning gain through MLA30+ pot is more effective.

Good morning, are you using just the mla30 amplifier box without the circuit that energizes it? Mine is coming soon and I'll start testing soon
gusdepaulasd is offline  
Reply