R/C Tech Forums - View Single Post - RCHourglass DIY Lap Timing (AKA Cano revised)
Thread: RCHourglass DIY Lap Timing (AKA Cano revised)
View Single Post
Old 08-03-2023 | 09:38 PM
  #888  
Adam007
Tech Apprentice
 
Joined: Jun 2021
Posts: 96
From: Australia
Default
Swapped those around, test voltages nearly spot on, however across the loop is showing 1.2v

The base of Q6 is showing 2.05v which is on par with the schematic saying to trim VR1.
Adam007 is offline  
Reply