I'm going to post this time for 90mm Narrow Class, though the time's not great, to document the progress TRYING to learn control of these SWB narrow cars! The superglue on the sidewalls of the front tires stopped the traction rolling, but they drive VERY DIFFERENT! I had many more mistakes needing reverse after gluing. Anyway it's a work in progress for sure!
Class- 86/90mm Narrow
Date-07/31/2023
Location- Central Texas
Race Time- 5:49.934 minutes/ 349.934 seconds
Fastest Lap- 3.940 seconds
Chassis- MR-03
Body- Mazda MX-5
Wheelbase- 90mm
Tires- F- N19mm 0mm PN White dish- Kyosho low height medium sidewall glued/ R- N19mm 0mm PN White Dish - Kyosho low height soft
Motor- Kyosho White endbell
Batteries- Eneloop 800hv
Front Springs- Green
T-Plate- PN #4 Carbon
Motor Mount- Kyosho stock RM
Dampener (If applicable)- PN Dual Spring Top Shock Yellow front/Purple rear
Dampener Fluid (If applicable)- Heavy Ball Diff Grease
Gearing- 64pitch 13t pinion/52t spur PN Gear diff
Notes- I was much more consistent before gluing the sidewalls, but traction rolled when pushing it. The dualspring top shock helped with the bad tire chattering, but I hope to have a aluminum RM mount with disk damper soon to get the car to handle better, with a lot more practice!


Also I received the 2mm HeliCoil kit, and I installed them in the front clip/spring plate chassis holes, and so far they are working well. I'll post on their continued use, and let yall know if they are a long term fix.
Take Care and Stay COOL!!! Drew