THE MOD IN THIS POST WOULD NOT BE TCS LEGAL

I recently installed a brushless motor into my TT-02s. The fan shroud was hitting the motor wire posts on the motor. I used a spare shroud, dremel, and cutting disc for a quick mod. This only took a few minutes. Basically I cut a corner off and the shroud no longer interferes with the wire mounts on the motor. Here are some pictures of the mod and the shroud mounted on the car.

I probably could have cut less off the shroud, but I thought this modification looked pretty clean.

- motor is a Hobbywing 21.5 sensored/fixed timing that was part of a 21.5/Justock ESC combo (discontinued)
- fan is a Yeah Racing Tornado High Speed Fan # YA-0180BU (30mm x 30mm) (https://www.yeahracing.com/tornado-h...180bu-00030330)

Hope this information is helpful.