I used Jesse Anderson's set-up as my base.

Here are the differences:
Body: Montech Akura
LiPo: GensAce Redline 8000 1S w/4mm bullets
Motor: USGT
Spur Gear: RW Racing 63T
Pinion: Arrowmax Super Lightweight 63T

SJT Sauce Time: 2 mins: ¼" from inside for fronts / full for rears
Sauce: SXT Lite
Sidewall Glue: I glue the fronts because our track has really high grip

Front Ride Height = 3mm
Caster: Depending on track layout (tight, open or mixed) I can go from 3-5°. Currently at 5° for a mixed layout with only 2 tight corners.
Droop spacers: 1
Toe: +0.5°
Inside wheel lock: 20° - got this tip from John Barron II on the FB

Rear Ride Height = 3.5mm
Rear Axle = Spool

Post back here to let us know if it works for you.