R/C Tech Forums - View Single Post - Frame rate testing
Thread: Frame rate testing
View Single Post
Old 01-22-2023 | 01:50 PM
  #4  
PDR's Avatar
PDR
Tech Elite
iTrader: (31)
 
Joined: Oct 2008
Posts: 2,207
From: Sydney, Australia
Default
Originally Posted by BigBuckORamma
Does your instrumentation also have the ability, or can it have the functionality added, to also test off center reaction time, and total response time?
Not in its current form. Measuring overall latency requires getting into the transmitter. Doable, as other threads have shown, but I'll add that to the backlog.

Originally Posted by BigBuckORamma
Also, also, are you running these with SSR/SXR/SUR and SR modes enabled?
The M17 is borrowed, so I'll need to dig up the manual. Will do the same for the T3PV.


Originally Posted by Roelof
So you have tested the main modes and no SSR, SXR modes with the M17, that would be more interesting

I have done similair with my Futaba and 3 different receivers.
https://www.rctech.net/forum/showpos...4&postcount=21
Not yet, but as above, I'll see what I can learn from the manual, unless you have a quick guide/cheat sheet and flipping between settings.
PDR is offline  
Reply