Originally Posted by
smanders
Can the 10PX set the channel directly to one of these s.bus Decoders?
https://www.frsky-rc.com/product/sbus/
It does not seem to work for me. When I read via the direct connection, the LEDs on the decoder blink real fast but the 10PX always says it did not discover anything. I also tried it on CH1 of a R304SB but got similar results. It would seem this decoder should look just like an s.bus servo to the transmitter.
My next step was to buy a Futaba SBC-1 but it seems like this should work.
Thanks for any tips. This is the first time I have worked with s.bus.
You answered your own question. You need a s-bus servo to add channels above 4. The manual show how to program the servo. This is why I hate Futaba. You have to buy expensive special servo to get more channels.
This is the reason why I'm looking at the flysky noble4 pro It can use up to 12 channels before I I need to use the i-bus for 6 more channels max 18 channels. I don't need all that junk on a radio that I will never use.