Originally Posted by TurboThirdGen

I've been working on the prototype splitter and diffuser for the 911 RSR body. Second prototype of the splitter and first prototype of the diffuser. Had to come up with a mounting system for the diffuser that allows the use of the rear bumper assembly, as I use the bumper mounted body posts all the way around. The mounting system came out excellent, and with a few more added tweaks it should work perfectly!

Here is a couple preview pics. I need to tweak the diffuser to come down a little more to be about flush with the bottom of the body. And I may add a slight curve on the splitter to more match the curve of the nose in the center.

Splitter


Diffuser



This stuff will be posted up soon once I finalize the designs.

As a reminder, My 3D print files are free and you can find them here: https://www.thingiverse.com/rc_perspective/designs

PS - Sorry for the poor photo quality. My Pixel 3XL bricked randomly overnight a couple weeks ago and I've had to downgrade as I don't have the funds to get another Pixel. This new phone has a "pro" camera mode, which is sadly more miss than hit.