R/C Tech Forums - View Single Post - Tekno RC SCT410.3 Thread
Thread: Tekno RC SCT410.3 Thread
View Single Post
Old 04-15-2022 | 01:15 AM
  #6056  
Jordan Anderson's Avatar
Jordan Anderson
R/C Tech Elite Member
iTrader: (6)
 
Joined: Mar 2004
Posts: 1,274
From: Calgary, AB, Canada
Default
Originally Posted by Luxin
I bought a set of DE Racing SpeedLine Plus SC wheels, says Tekno SCT410 on the label, and they rub the steering spindle - ball link cap head screw just a little. Part number DER-PS4-LW. Suggestions for other wheels? Edit: I found the wheel list at the start of the thread.

How will removing a washer affect bump steer? Edit: Just removed the two washers on top of each screw, this dropped the screw enough for proper clearance. Just leaving this here in case someone has a similar situation.

Thanks!
Replacing cap head screw with button head screw gives more clearance. Washers on top of steering link won't effect bump steer but the washers between the link and spindle do. Leaving out top washers might cause clearance issues on other end of screw.
Jordan Anderson is offline  
Reply