Originally Posted by
MUDVAYNE
So here's the $64 question. Will we be able to take the new pod and put it on the EVO 2?
I asked Max Ma of Roche and he provided a list of parts that would need to be swapped in order to just change the motor mounts from a Evo2 to Evo3. it isn't as simple as buying two motor plates.
1x 210274 Rapide P12 EVO2 Center Pivot Mount Spacer Set, 0.5/1mm <-- Evo2 optional part that you might already have
1x 210279 Rapide F1 EVO3 Aluminum Center Pivot Ball Mount
1x 210280 Rapide F1 EVO3 Aluminum Lower Pod
2x 210282 Rapide F1 EVO3 Aluminum Motor Mount / Rear Bulkhead
1x 220218 Rapide F1 EVO2 Graphite Rear Pod Plate <-- you should already have this
1x 220281 Rapide F1-EVO3 Graphite Chassis Brace
finally you'd need the axle holder -- not sure which best works depending upon ride height goals--
240175 Axle Height Adjuster, OP Version (0.75)
240176 Axle Height Adjuster, OP Version (1.00)
240177 Axle Height Adjuster, OP Version (1.25)