Originally Posted by TurnNBurn

Well, to adjust tension on the belt, the cams that hold the diffs are eccentric, with the holes slightly favored in the direction of the arrow of the cam. By default, the arrows should be facing straight down. To increase tension slightly, slide them one tooth toward the outside.

It’s a little odd that the kit doesn’t come with a base setup, but if everything is measured correctly, the settings you have are basically the base setup; I’m sure someone will fill out a setup sheet based on it and share somewhere.

I took a look at the manual and agree that it does seem to lack a little detail compared to the standard X20, but the good thing about the digital manual is that they do update them. The X20 manual, for example, is at 1.3 if I’m not mistaken, so do keep an eye out on the Serpent website for any updates.