Originally Posted by
Cepted
Hi guys,
So I purchased a 2020 x12 last indoor season, I thought the front was very well made however the shim system in the rear is a pain.
I was told I could swap rear pods with a better design from another brand, any recommendations?
Many thanks
I still have a X12 '20 in my arsenal. I found the pain was worse when you try to change the shims on the rear pod with both hubs on the axle.
A simple technique that made my life so much easier was to remove the Left Rear Hub (one single screw that clamps the axle) and slide the axle out of the pod.
Everything is still intact and you can quickly and less painfully change the shims under the axle/bearing carriers.
Then, just make sure you slide the axle back into the pod before you tighten everything up.