Hello,
Sorry about that mismatch on the size of the bullets. Nothing can ever be easy. You, would have to make, or buy, a pigtail convertor from 4mm to 6.5mm.
Getting in the weeds here. If all else fails just put the old system in. It is not a bad system at all. I doubt it overheated with that torquey 1920kv in it, especially only on 4s.
Later,
Tony
Originally Posted by
NoobieScooby
Faulty ESC would be just my luck.... How else could you really narrow it down to know for sure that it's the ESC?
It is the 120A ESC, BUT, the motor connectors are 4mm, whereas the Hobbywing are the 6.5 mm bullets.