R/C Tech Forums - View Single Post - Just checking LiPo charging parameters. Please verify...
Old 03-21-2021 | 07:11 AM
  #1  
TonyBen's Avatar
TonyBen
Tech Apprentice
 
Joined: Apr 2020
Posts: 64
Default Just checking LiPo charging parameters. Please verify...

I bought a MaxAmps battery with the following specs...
  • 2250mah capacity
  • 3S 11.1 volts
  • True 100C rating
  • Lifetime warranty
  • 5C fast charge capable
I have a Tenergy TB6B charger. According to what I'm reading, I can charge this battery at 11.25 amps, but the charger's max amperage is 5 amps. I should be able to balance charge at 5 amps safely?

Also, I have three Lectron Pro 2S 2000mAh 50C LiPo's. It says 2C charge rate on them, so I can safely balance charge these at 4 amps? I was going to play it safe and charge them at 2 amps anyway. I've been charging them at 1amp and it takes about an hour and a half.

I also ordered two Turnigy 3s 2200mAh 40C LiPo's. Hobbyking says on their spec page that max charge rate is 5C,so I can charge these at 5 amps safely?

TIA,
Tony.
TonyBen is offline