Originally Posted by
gigaplex
Even then, the default resting discharge voltage on my iCharger is lower than 3.6 and most literature I can find online usually refers to 3.0V to 3.2V as the minimum safe voltage for a LiPo.
Besides, my Hobbywing telemetry tells me my load voltage regularly dips below cutoff voltage without triggering cutoff. It tries to ignore transient dips.
Agree, I've always seen 3-3.2V minimum voltage listed too, and have had good results with 3.2V LVC (no telemetry sadly). I generally see some voltage recovery after say 30 minutes, especially with a deep and/or hard discharge. Are you not experiencing this with the RC or discharger? I believe iChargers have a couple compensation options for storage voltage to improve accuracy because of voltage recovery.