Originally Posted by
Dave H
He might be referring to resting voltage. A ~3.2V LVC cutoff under load can easily be in the 3.6V+ range after sitting awhile. When discussing low voltage its's always helpful to clarify which one is being used.
Even then, the default resting discharge voltage on my iCharger is lower than 3.6 and most literature I can find online usually refers to 3.0V to 3.2V as the minimum safe voltage for a LiPo.
Besides, my Hobbywing telemetry tells me my load voltage regularly dips below cutoff voltage without triggering cutoff. It tries to ignore transient dips.