Originally Posted by
Losiracer12
Pop the case apart and show us the differences. 2 more race days then your previous experience doesn’t mean much if you just have had some better luck or less impacts. I expect that you will find that the Nitro Pro happens to be identical internally to your AGF servos
Why can't you trust what Nitro Pro is saying?
While the 1.6 x 13.5mm pin remains the same as well as all the gears, pretty much everything else is different just as I was told it would be.. smh
I'm not going remove the protective plastic, nor am I going to pull the board to get to the pot, but you can clearly see the aluminum case has been revised to prevent the brass pinion from sliding out of position, and they've completely revised the circuit board which is marked with ASS all over it:
Looks nothing like the AGFrc branded A80BHMW board:
I will say again, the rebranded servos have been upgraded and assembled properly... the AGFrc branded servos are overpriced and lacking quality... I DO NOT recommend buying any AGFrc branded servo period, but I would recommend NitroPro branded servos... they are worlds apart even though they come from the same OEM.
This is like comparing a Toyota to a Lexus