Originally Posted by
WhiteLX
I've got some v2 big bore shocks on the way, can I use the standard shock bushings or are they larger in diameter for the big bores? I notice the 1780/1781 shock bushings called out int he SC10.2 manual are discontinued, is there a newer part number that works? Maybe 91815/91816/91817? ...
It depends on what the shocks came off of ... if they are from an SC10.2, they will have aluminum caps that use either the 1780 (alum) or 6473 (plastic) top shock bushing with 4/40 screw and 4/40 screw in the 1777 lower shock pivot ball ... IF the shocks came off of a 5 or 6 series vehicle, they have the plastic caps with the larger opening, and will use M3 metric screws, and 91445 (plastic) top shock bushings (or aluminum sized equivalent), and M3 screw in lower pivot ball ... ... if you are unsure of which you have coming, post a pic and I can probably tell you
Edit to add: .. forgot to respond to your 91815/6/7 question ... these would fit the 5 and 6 series shock caps, too large diameter for the 4/SC10 series caps ... should you need aluminum bushings for your shocks, I have several sets that fit 5/6 series caps that I could let go ... probably a variety of standoffs as well