Originally Posted by
tomkatn
I just checked my notes, and it looks like I have the 7933 listed at 5/32" long, and the 7377 at 15/64 long ...
I found these. The ID may be a tad large, but the OD and length are correct. If it's just meant to prevent the bearings from being crush inwards, it should work.
https://www.aluminumspacers.com/spac...ers/as25-10-10
McMaster has some with a little larger OD, not sure if they would work.
https://www.mcmaster.com/92510A197/. Would need to have the hubs in hand to determine if they are an option.