R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 01-13-2021 | 04:23 AM
  #48744  
hanulec's Avatar
hanulec
R/C Tech Elite Member
iTrader: (29)
 
Joined: Sep 2007
Posts: 10,639
From: @ the post office
Default

Originally Posted by MC Hamilton
Thank you for this. Running a Roche Evo 12 in 17.5 class. Have been running tires a little bigger than that, but in the ballpark.
The Rapide P12 Evo is very quick in 17.5 1/12--- we've had some really good races with that car. We liked running with the bell crank especially on 17.5 with spec tires. The kit is the 2020 ROAR National Champ in 17.5 1/12 at the hands of Joe Trandell.

The key was playing with the shim height at the center bell crank. +3 to +4mm of shim along with the optional longer ball stud (#330179) are key to controlling the car on corner exit. Higher causes the car to continue turning on exit. Lower causes the car to push more on exit.
hanulec is offline