R/C Tech Forums - View Single Post - Timing for 1s
Thread: Timing for 1s
View Single Post
Old 11-09-2020 | 07:30 PM
  #2  
gubbs3's Avatar
gubbs3
Tech Fanatic
iTrader: (7)
 
Joined: Aug 2006
Posts: 811
From: MN
Default

The short answer is, because it works.

The long answer has more to do with the power band. Since the rpm is so low, and in spec 12th, the cars speed is fairly consistent compared to other classes. The motor needs to make power in an rpm range that isn't going to cause spikes in amp draw and build too much heat.

gubbs3 is offline