R/C Tech Forums - View Single Post - SC10 Thread Part 2
Thread: SC10 Thread Part 2
View Single Post
Old 11-07-2020 | 07:26 PM
  #4346  
MD's Avatar
MD
Tech Champion
iTrader: (138)
 
Joined: Aug 2005
Posts: 5,786
From: Illinois
Default
Originally Posted by tomkatn
The graphite strap (9851) is actually designed to use with the same 9879 Thumb Knobs as is currently on the OP's 10.3, so won't really alleviate his dissatisfaction much ... a couple options may be to use the 1787 Thumb Screws used on the B4's, where they can just be 'spun' on, making it a bit easier ... or a couple 4/40 Socket Head Cap Screws WITH HOLES, and use a body clip to hold the strap down ... or, you could even cut a couple slots in the sides of the battery tray, and use the 71050 velcro straps like used on the ProSC10, DR10 and T-Rat ...

https://www.associatedelectrics.com/...h/?query=91458

https://www.associatedelectrics.com/...h/?query=71050

https://www.associatedelectrics.com/...ch/?query=6929
Yes, the graphite battery is designed for the thumb screws. I don't mind those because your battery will never come loose. But, the fig disadvantage is for me was losing one of the thumb screws. The third item on your list the 4-40 screws with the holes for a body clip are a good alternative if you can find them. They take a very thin body clip.i
MD is offline  
Reply