Originally posted by snaponjunky1
hey i know this has been asked thousand times - setup for pavement - what springsto run frt/ rr -toe in or out ,camber +/-degree - shock piston -oil wt . heres it current set up untested by me what i know it will run take off cs27 - stock motor - it has a 71 th spur gear - 23 pinion - white springs up front and yellows in rear -no sway bars - shock pistion ? oil wt? it was ran on carpet before I own it . car is free had a few bent axle but they where replace . everthing is staight as far as I can see after putting on my setup station. well let me know where to start by the way i have to of these cars want one to be a 19t car same or different set up thanks mike
Those springs should be a good starting point. Check to see what pistons are in the shocks now. Usually yokomo #2's with about 40 in front and 30 in the rear is a good starting point. You can check out some setups on
www.yokomo.tk if it's working still as well.
I see you're from Toms River, my wife is from Forked River