View Single Post
Old 08-14-2002, 01:47 AM
  #3393  
rjl
Tech Fanatic
 
rjl's Avatar
 
Join Date: Jun 2002
Location: OZ
Posts: 848
Default Re: Ok now..!

Originally posted by RClover



its all over now..!! I took the Kyosho collar out and put the RB collar back in. Now the clutch bell is not as loose as b4. There is about 0.5mm freeplay which i think is normal.
One thing though, i cant use the 3mm washer as indicated in the manual (it will bind the clutch bell as its thicker), instead i use another smaller washer (available in the pack) which cover only 3/4 of the bearing. Now, do u think dirt will get into the bearing?

cheers mate
Do not use the rb collet, use the Kyosho one. There is a washer shown in the instructions that is placed on the shaft before the collet, make sure it is in place.
rjl is offline  
Reply With Quote