Originally Posted by
hookedup
Hey guys.. looking at a 5T roller V2.. can anyone tell me the difference between the 2.0 and the V2? Curious if parts are interchangeable between the two and or are still available..
thanks
2.0 is the v2 so no difference there
90% of the v1 and v2 parts are interchangeable, it's only the area around the centre driveline that has had major changes
To reduce the front driveshaft angle, the centre diff has been flipped around and moved about an inch back to the rear, and 1/2 an inch toward the centre line. This means the v1 centre driveshafts are a different length, and they are now also dogbones, as opposed to a dogbone on one end, and a coupler on the diff input end. The spur gear faces the front now. The engine mounting holes are also different as they're for the Zenoah engine, as opposed to the CY engine on the v1, so engine spacers are also different