Hi guys
I just recently purchased myself a HobbyWing EZRUN Max10 SCT Combo.
I have a Futaba 2PHKA-AM 2 channel radio control system.
I have connected the cable from the ESC into channel 2 which is the throttle channel and have connected the Steering servo into channel 1 which is the steering channel.
I start the calibration process which it starts flashing red and I have my controller in neutral position to set the neutral position and as i click "set" it dosent flash green once or beep. I try do this with the throttle and breaking to calibrate but nothing works.
Any help would be appreciated.