Originally Posted by
Roelof
Again, if it is sensored no way you can swap cables unless you want to burn the whole thing
Well, to be precise, it is possible to swap two wires, but you also have to swap two wires of the sensor cable. After that, the timing of the sensor board has to be adjusted accordingly.
1) switch motor cables B and C
2) switch Hall sensor A and Hall sensor C which is #2 and #4 on the sensor cable (if you have a ROAR certified cable)
3) adjust the timing of your sensor board which might not be possible without doing some modification.
Originally Posted by
Baha x
My last option is to pull the tranny apart and put the motor on the other side.
If you mean putting the motor and the main gear to the other side, don't bother, that won't change the rotating direction of the wheels.
Andi