Originally Posted by
the rc guy
I think your gonna have to go into the esc and change rotation if its a non sensored motor you can switch any 2 wires on esc to motor that will change rotation of motor
I clearly wrote 1st thing was to go and change esc rotation... and clearly said IF NON Sensored change esc to motor wires . Helps is a op know or reads his manuals 1st. try that the esc rotation can be changed ccw/cw.. I dont deal with hw so I dont know what this requires more than likely a card.no way to let the smoke out by changing wires from esc to motor in a sensored motor .only result will be cogging.