Originally Posted by
GeorgeCk
It started acting like this after uptdating to the latest 2.0.85 firmware.
I hope they release a new firmware soon to fix the problem because with the previous firmwares I had other problems like the Led on the radio blinking continually, even if the radio was turned off and the base battery was removed, until the battery drained out itself.
It is such a good radio but this small problems here and there make it very frustrating.
I hope they come out with a solid firmware update.
Well, I'm not sure long you've had your radio but if you have an older firmware saved on your computer, you can try reverting simply to confirm if you have a software issue or hardware issue. I'd record your current issue before swapping firmware in the event the old firmware ends up working fine. This way, you can email your findings to Flysky so they can work on a solution. If it turns out you have a hardware issue then they should hopefully help you out.
I've emailed Flysky several times over minor things I'm finding and they have been fairly responsive. I did email them about needing the ability to disable the "inactivity alarm" separately from the overall "alarm" setting. At first they were not understanding what I was explaining to them but now I think they do.
Turning off "system sounds" simply disables the menu touch sounds but you still hear the "inactivity alarm" sound. If you disable the "alarm sounds" you then finally disable the "inactivity alarm" sound but you also disable any telemetry alerts. You shouldn't be forced to shut down all alerts simply to disable one annoying feature.
I used to have the inactivity alert enabled on my Lynx 4S but after awhile, it gets real annoying so I disabled it. I can't recall the last time I forgot to shut one of my radios off so I'd rather have the disable option.