MALAYSIAN NATIONAL CHAMPIONSHIP (MNC) EP 2020 - ROUND 1, 8TH & 9TH AUGUST 2020
Malaysian National Championship (MNC) EP 2020
A FEMCA & IFMAR -santioned series via RC Malaysia
MNC 2020
With the collaboration of ARROWMAX, BITTY DESIGN(RCPITSTOP) and MNC 2020, for this season we would like to introduce to Malaysia Racers there will be 6 categories to be carried out. To encourage new racers participation and inspire hardcore RC racers, little change in rules and regulations will be made to meet the needs of Racers and we emphasize the balance of costs, skills and technology of RC Product. ARROWMAX will be our official Premier Sponsor and BITTY DESIGN (RCPITSTOP) co-sponsor for this season and there will be benefit for all RC community.
Organized by MNC2020 committee
MNC 2020 Round 1: 9th August 2020, Sunday, Kota Raja RC Track, Klang, Selangor
MNC 2020 Round 2: 27th September 2020, Sunday, STA RC Track, Ipoh, Perak
MNC 2020 Round 3: 6th December 2020, Sunday, TBA (Selangor@KL)
Time - Sunday - 9:00am - 7:00pm ( 3Heats and Finals )
Organized by MNC2020 committee
RACE CATEGORIES:
1. Touring Car - Modified
2. Touring Car - SuperStock (13.5t boosted)
3. Touring Car GT Class - Stock (17.5T non-boosted)
4. Mchasis Class - Stock (17.5t non-boosted)
5. Tamiya Truck Class- Stock (17.5t non-boosted)
6. FF Class- Stock (17.5t non-boosted)
RACE FORMAT:
- 3 Heats (point base)
- 3 Finals for A-Mains, 2 Finals for B Main and 1 Final for all other Mains
Grid position for Finals will be based on best 1 out of 3 Heats.
Race result will be based on IFMAR rules.
MNC CHAMPIONSHIP POINTS:
Top 20 drivers (A Main dan B Main) qualify for championship points in the following order (22,20,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2, 1).
Overall champion will be base on 3 of 4 rounds for Modified, Super Stock, Stock, Truck, FFwd and M chassis.
TQ will earn an additional 1 bonus point.
RULES AND REGULATIONS:
MODIFIED Touring Car
Motor : 10.5 turn and Below (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved)
Motor timing : no restriction
Esc : Open (timing and turbo functions ALLOWED)
Tires/Rims/Inserts : Controlled Tires (ARROWMAX 30). 2 sets only (Heats and Finals)
Bodyshell : IFMAR rules apply
Min Weight : 1320gm (with transponder)
Batteries : HV Lipos are allowed but voltage is restricted to 8.44 volt only and will be checked by officials prior to Heats/Finals. Please ensure lipos are marked prior to each Heats/Finals.
Drivers : Professional Racer, Subsidize Racer and Regular racer
SUPERSTOCK Touring Car
Motor : 13.5 turn (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved)
Motor timing : MAX 3500KV, no Amps Control.
Esc : Open (timing and turbo functions ALLOWED)
Tires/Rims/Inserts : Controlled Tires (ARROWMAX 30). 2 sets only (Heats and Finals).
Bodyshell : IFMAR rules apply
Min Weight : 1320gm (with transponder)
Batteries : HV Lipos are allowed but voltage is restricted to 8.44 volt only and will be checked by officials prior to Heats/Finals. Please ensure lipos are marked prior to each Heats/Finals.
Drivers : Professional Racer, Subsidize Racer and Regular racer
BITTY GT Stock Touring Car
Motor : 17.5 turn (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved) Any attempt to modify or to influence the ability of the motor is not allowed (Ceramic bearing and rotor modification is NOT ALLOWED).
Motor timing : MAX 2900KV.
ESC : OPEN ESC BUT MUST BE IN BLINKY MODE (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved)
Any attempt to modify or to influence the ability of the E.S.C is not allowed (Changing capacitors are Allowed).
HW XR10 Just Stock is allowed.
For those who are not using TRUE BLINKY ESC, please ensure ESC have LED blinking and prepare prog card for organizer to do checking (upon request)
Tires/Rims/Inserts : Controlled Tires (ARROWMAX 30). 1 setonly (Heats and Finals)
Bodyshell : controlled BITTY Design Bodyshell, Venom, AGATA and Seven20 1/10 GT 190mm
Min Weight: 1320gm (with transponder)
Batteries: HV Lipos are allowed but voltage is restricted to 8.44 volt only and will be checked by officials prior to Heats/Finals. Please ensure lipos are marked prior to each Heats/Finals.
Drivers : First time racers, newbies and beginners
M-CHASSIS Stock 17.5T
Motor : 17.5 turn (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved) Any attempt to modify or to influence the ability of the motor is not allowed (Ceramic bearing and rotor modification is NOT ALLOWED).
Motor timing : MAX 2900KV.
ESC : OPEN ESC BUT MUST BE IN BLINKY MODE (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved)
Any attempt to modify or to influence the ability of the E.S.C is not allowed (Changing capacitors are Allowed).
HW XR10 Just Stock is allowed.
For those who are not using TRUE BLINKY ESC, please ensure ESC have LED blinking and prepare prog card for organizer to do checking (upon request)
Tires/Rims/Inserts : Controlled Tires (DS Racing (36R,34R)). 1 set only (Heats and Finals)
Bodyshell : Only realistic ABC, Tamiya, HPI, Blitz, SPICE mini bodyshell are allowed.
High Roof (Wing that comes with the bodyshell is allowed)
Min Weight: 1280gm (with transponder)
Drive Train & Transmission: 6.4 (Max) Final Drive Ratio.(M05/M03/M07 Pinion 18, Gambado: 20T/30T pinion 28).
No speed gear modification allowed.
Front Lock Diff Situation is NOT ALLOWED.
Gear differential is allowed.
Chassis: M03, M04, M05, M06, M07 and Gambado only are allowed.
Conversion to Evo or other carbon chassis is not allowed.
Cars have to retain original wheel drive concept, no 4WD of twin motor configuration will be allowed.
Batteries: HV Lipos are allowed but voltage is restricted to 8.44 volt only and will be checked by officials prior to Heats/Finals. Please ensure lipos are marked prior to each Heats/Finals.
Drivers : First time racers, newbies, beginners and regular racer
TAMIYA Racing Truck
Chassis: TAMIYA TT01 Truck Racing chasis (all factory standard from box)
- option part is allowed
Diff & Bevel gear
-Standard Bevel gear only allowed
-Diff lock is not allowed
-Diff oil, putty is allowed, but diff must not lock
-Organizer will do diff checking
BodyShell: Open Brand, Tamiya Truck Racing Bodyshell ( MAN TGS & BUGGYRA FAT FOX) & BittyDesign IRON 1/10 TRUCK
-Standard pieces body set must be applied. If any chance the truck head peel off, the truck must
go to the pit stop to attach back the bodyshell.
-Additional hole for reduce weight or aerodynamic is not allowed
FDR: >= 7.2 (standard spur from box 61, option pinion 22)
Motor : 17.5 turn (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved) Any attempt to modify or to influence the ability of the motor is not allowed (Ceramic bearing and rotor modification is NOT ALLOWED).
Motor timing : MAX 2900KV.
ESC : OPEN ESC BUT MUST BE IN BLINKY MODE (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved)
Any attempt to modify or to influence the ability of the E.S.C is not allowed (Changing capacitors are Allowed).
HW XR10 Just Stock is allowed.
For those who are not using TRUE BLINKY ESC, please ensure ESC have LED blinking and prepare prog card for organizer to do checking (upon request)
Tires: Tamiya truck rubber tyre (Standard from box)
-Insert is not allowed
Rim: Open brand
Batteries: HV Lipos are allowed but voltage is restricted to 8.44 volt only and will be checked by officials prior to Heats/Finals. Please ensure lipos are marked prior to each Heats/Finals.
Min Weight: 1350g(with transponder)
Drivers : First time racers, newbies, beginners and regular racer
FFWD Class
Motor : 17.5 turn (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved) Any attempt to modify or to influence the ability of the motor is not allowed (Ceramic bearing and rotor modification is NOT ALLOWED).
Motor timing : MAX 2900KV.
ESC : OPEN ESC BUT MUST BE IN BLINKY MODE (open to all brands - must be ROAR/IFMAR/EFRA/JMRCA/BCRA approved)
Any attempt to modify or to influence the ability of the E.S.C is not allowed (Changing capacitors are Allowed).
HW XR10 Just Stock is allowed.
For those who are not using TRUE BLINKY ESC, please ensure ESC have LED blinking and prepare prog card for organizer to do checking (upon request)
Tires/Rims/Inserts : Controlled Tires (ARROWMAX 30). 1 setonly (Heats and Finals)
Bodyshell : Open Brand, Realistic FFWD bodyshell 1/10 190mm
Min Weight: 1250gm (with transponder)
Batteries: HV Lipos are allowed but voltage is restricted to 8.44 voltonly and will be checked by officials prior to Heats/Finals. Please ensure lipos are marked prior to each Heats/Finals.
Drivers : First time racers, newbies and beginners
Motor KV (Super Stock, Bitty GT Class, FFwd, Mchasis and Truck) will be checked by organizer officials prior to start of event. Please ensure that the motor is marked or you will be prohibited from racing or be disqualified.
RACING FEE:-
Deadline for Entry Fee: August 5th 2020
Touring (Modified, Superstock, GT) -RM80 included FEMCA fees (After deadline, additional RM20)
Other category -RM70 (After deadline, additional RM20)
Two Category -Discount RM10
(Racing fee includes race fee, lunch & drinks on Race-day ).
*Tyre is not included. Please get from Local Hobby Shop
Fee to be paid to below account details
CIMB Bank
8602102342
HDRC ENTERPRISE
Receipt must be whatapp to Nik Ehzan -0122098174
PRIZES
• Trophy for all.
Registration will be closed by 5th August 2020.
PIC CONTACT – Any info regarding to rule and any unclear information please contact PIC below.
Nik -0122098174
Last edited by BEG6133; 07-27-2020 at 03:25 AM.