Originally Posted by
RodRC
I actually never set a failsafe, and I recieved two fgr4s. I'm using a Arrowmax Dash esc, which I calibrated after binding to radio. So I tested my 2ed buggy and doesnt happen to radio. I'm wondering if it could be a sensor wire? Or maybe the reciever gets a bad signal after turning off is why radio sees it as full throttle? I downloaded the standard 85 , I live in Sacramento CA. So not sure if I need to download FCC.
Sorry for the late reply, I've been working crazy hours and when that happens, the hobby takes a back seat. Okay, so you received two FGR4S, does this issue happen with both RX in the same vehicle? You have a Dash ESC, have you tried removing the sensor wire and running the car in sensorless mode strictly as a test? At this point, you really have to go out of your way and install the radio gear in another kit, whether it's yours or not as a test. You need to be able to confirm the problem persists while using a completely different ESC and motor combo to be able to say, it's definitely a radio issue because it's unlikely, though not impossible, that you have two faulty RX. You may want to email Flysky and link them to the particular post numbers (so they aren't reading unnecessary posts) where you discuss and show pictures of what's happening and see what their conclusion is. Wish I could help more:-/