Originally Posted by
andreas78
Well, but still, when I bind in 2-way mode, the servo reacts directly after the binding process is complete. Even with the bind plug still inserted and no off/on cycle of the receiver.
In 1-way mode, it doesn't, only after I turn off the receiver and turn it on again, the servo works.
Andreas
Here is FLYSKY's reply to my question about the 1 Way binding.
Hello:
In 1-WAY mode, when the receiver completes BIND, the indicator light will flash from fast to slow. When the BIND line is removed, the transmitter exits and the receiver indicator light will always be on.
In 1-WAY mode, it is necessary to re-code the steering gear response speed to change, and our subsequent firmware will be improved.
Thank you for your support of FLYSKY products.
I still haven't asked about why I can update the firmware in two different locations for the receivers and which one is correct.