Originally Posted by the rc guy

Id take a look at this charger.it will charge just about any battery we use in rc and you can set it to charge at a much higher amperage and a low conditioning rate. the toolkit M8 or even M6.. you will need a 12volt power supply. I made a 12.4 volt power supply from a computer power supply a little time and a few parts and your set....many online tutorials to help you convert the atx to a bench power supply...amazon is where to get that charger.id also look into a 2 cell lipo in the 5000mah + range ..about 50c will be fine. run times will exceed 25 minutes so take a break after about 8 and lets things cool off...