talk about it here
Tamiya "DJ" Pro-Module Rear Suspension System
Now available from Tamiya America, Inc. is a new concept in suspension design, the Pro-Module Rear Suspension system for the 415MS and Evolution IV chassis kits. Item # 1004
The Pro-Module Rear Suspension incorporates the upper link and wheel hub as part of the dampening system as apposed to a conventional design. This effectively creates a linkage system (cantilever) with no additional moving parts. The result is a reactive and exponential dampening geometry to enhance control and drivability. Both the arms and hubs are machined aluminum finished with a bold anodized plating. Hubs feature 0 deg. of toe.
System Contents
1002 Pro-Module Suspension Arm 2pc
1003 Pro-Module Suspension Hub 2pc
N/A Spring (Red) 2pc
9805611 5 X 9mm Ball Connector 2pc
53533 3 X 16mm Titanium Screw 4pc
9805894 10mm Spacer 4pc
9804153 5.5 X 2mm Spacer 2pc
9804152 5.5 X 3mm Spacer 2pc
looks preety good to me...by wat they say there it should handle better....it deffenatly brings the bling