View Single Post
Old 05-03-2005, 08:19 AM
Jon Kerr
Tech Champion
iTrader: (17)
Jon Kerr's Avatar
Join Date: Jul 2002
Location: San Diego
Posts: 9,659
Trader Rating: 17 (100%+)

Originally posted by LoSi xXx S
Jon on your set-up you posted you say that stand up the front shocks to the outside hol on tower. and i was thinking that , that would not let me get hard corners as my local track is a small tight track. If i put the shocks on the 2 hol in on tower would that let me take them more easily?
If you look though, the front roll center being only 1mm will give the car a ton of turn in. Trust me. Set the car up exactly how it is on the sheet, drive it a couple times, and then start making adjustments. You don't want to do anything until you actually drive it and see how it feels. I run this setup on a tiny little parking lot track that we can't hardly run modified on it's so small and narrow. The front roll center effects the handling of the car a ton. Lowering that from the stock 2mm down to 1mm will give tons of turn in.
Jon Kerr is offline  
Reply With Quote